(a) Protection of employees. (1) No employer shall permit an employee to work in such proximity to any part of an electric power circuit that the employee could contact the electric power circuit in the course of work, unless the employee is protected against electric shock by deenergizing the circuit and grounding it or by guarding it effectively by insulation or other means.
(2) In work areas where the exact location of underground electric powerlines is unknown, employees using jack-hammers, bars, or other hand tools which may contact a line shall be provided with insulated protective gloves.
(3) Before work is begun the employer shall ascertain by inquiry or direct observation, or by instruments, whether any part of an energized electric power circuit, exposed or concealed, is so located that the performance of the work may bring any person, tool, or machine into physical or electrical contact with the electric power circuit. The employer shall post and maintain proper warning signs where such a circuit exists. The employer shall advise employees of the location of such lines, the hazards involved, and the protective measures to be taken.
(b) Passageways and open spaces—-(1) Barriers or other means of guarding shall be provided to ensure that workspace for electrical equipment will not be used as a passageway during periods when energized parts of electrical equipment are exposed.
(2) Working spaces, walkways, and similar locations shall be kept clear of cords so as not to create a hazard to employees.
(c) Load ratings. In existing installations, no changes in circuit protection shall be made to increase the load in excess of the load rating of the circuit wiring.
(d) Fuses. When fuses are installed or removed with one or both terminals energized, special tools insulated for the voltage shall be used.
(e) Cords and cables. (1) Worn or frayed electric cords or cables shall not be used.
(2) Extension cords shall not be fastened with staples, hung from nails, or suspended by wire.
[44 FR 8577, Feb. 9, 1979; 44 FR 20940, Apr. 6, 1979, as amended at 55 FR 42328, Oct. 18, 1990; 58 FR 35179, June 30, 1993; 61 FR 9251, Mar. 7, 1996; 61 FR 41738, Aug. 12, 1996]
Notes of Decisions
Wayne J. Griffin Elec., Inc v. Sec'y of Labor, 928 F.3d 105 (D.C. Cir. 2019).
· cites it 4× “29 C.F.R. § 1926.416 (a)(3). Another standard prohibits an employer from permitting work "in such proximity to any part of an electric power circuit that the employee could contact" the circuit, unless it is de-energized or effectively guarded.”
Thomas v. City of Philadelphia, 668 A.2d 292 (Pa. Commw. Ct. 1995).
“416 of the Code of Federal Regulations, 29 CFR 1926.416, which provides appropriate safety procedures that an employer should follow upon entering a contract for services to be performed in close proximity to electric power lines.”
CMC Elec., Inc. v. Occupational Saf. & Health Admin., 221 F.3d 861 (6th Cir. 2000).
· cites it 4× “Further, the Secretary points out that *866 CMC did not instruct its employees on the restrictions located at 29 C.F.R. § 1926.416 , which govern work performed in proximity to an energized line.”
J.A.M. Builders, Inc. v. Alexis Herman, 233 F.3d 1350 (11th Cir. 2000).
· cites it 10× “The safety standard at issue, 29 C.F.R. § 1926.416 (a)(1), provides: No employer shall permit an employee to work in such proximity to any part of an electric power circuit that the employee could contact the electric power circuit in the course of work, unless the employee is…”
J.A.M. Builders, Inc. v. Alexis Herman, 233 F.3d 1350 (11th Cir. 2000).
· cites it 2× “The safety standard at issue, 29 C.F.R. § 1926.416 (a)(1), provides: No employer shall permit an employee to work in such proximity to any part of an electric power circuit that the employee could contact the electric power circuit in the course of work, unless the employee is…”
Mass Elec. Constr v. OSHA (1st Cir. 2000).
“It is undisputed that neither McCormick nor an employee assisting him was using proper insulation or other appropriate protective equipment for working on a live circuit, in violation of 29 C.F.R. § 1926.416 (a)(1). The company responded to a citation from the Occupational…”
— 29 C.F.R. § 1926.416(a)(1) — 1 case
J.A.M. Builders, Inc. v. Alexis Herman, 233 F.3d 1350 (11th Cir. 2000).
“The safety standard at issue, 29 C.F.R. § 1926.416 (a)(1), provides: No employer shall permit an employee to work in such proximity to any part of an electric power circuit that the employee could contact the electric power circuit in the course of work, unless the employee is…”
Annotations are extracted automatically from the opinions in the
Syfert caselaw corpus and ranked by authority, recency, and
treatment. Dots show Syfertize treatment of the citing case itself.