Poly-Vac v. Plastic Sterilizing
v.
Plastic Sterilizing
Poly-Vac v. Plastic Sterilizing CV-94-635-B 10/03/95 UNITED STATES DISTRICT COURT FOR THE DISTRICT OF NEW HAMPSHIRE
Poly-Vac, Inc. v. Civil No. 94-635-B Plastic Sterilizing Trav Corp.
MEMORANDUM AND ORDER
Poly-Vac brings this action alleging patent and trade dress infringement in violation of federal and state law. Defendant Plastic Sterilizing Tray Corporation ("PST") moves for summary judgment on all of Poly-Vac's claims. In response, Poly-Vac moves for summary judgment on its claim of patent infringement and opposes summary judgment on the other claims. For the reasons that follow, I deny both motions.
BACKGROUND
The parties' dispute concerns a plastic tray that is used to sterilize, transport, and store medical instruments. Poly-Vac owns a patent for a three-part sterilizing tray assembly. United States Patent Number 5,098,676 ("'676 patent").1 The '676 patent covers a product with two locking tray halves that enclose a silicone rubber mat with upwardly tapering "fingers" on its upper surface and raised projections on its bottom surface. The raised projections suspend the mat above the tray bottom and thereby prevent condensation from building up between the mat and the surface of the lower tray. The patent also provides that both tray halves and the silicone mat will have aligned apertures to facilitate drainage. PST makes a similar three-part sterilizing tray. However, PST's tray suspends the mat above the bottom tray by using projections rising from the surface of the bottom tray rather than projections descending from the mat.
Poly-Vac alleges that PST's trays infringe the '676 patent.
35 U.S.C.A. § 271 (West 1984 & Supp. 1995). It also contends that Poly-Vac is liable under the Lanham Act, 15 U.S.C.A. § 1125(a) (West. Supp. 1995), the common law of unfair competition and New Hampshire's Unfair Trade Practices Act, N.H. Rev. Stat. Ann. ch. 358-A (Supp. 1994), because the size, shape and color of PST's trays are so similar to Poly-Vac's trays that the public is likely to be confused as to the trays' origin. PST moves for summary judgment on all of Poly-Vac's claims, arguing that (1) the '67 6 patent is invalid because "the device it describes would have been obvious to a person having ordinary skill in the prior art"; (2) the patent is unenforceable because Poly-Vac intentionally failed to disclose pertinent prior art when it applied for the '676 patent; (3) the doctrine of prosecution history estoppel prevents Poly-Vac from claiming patent infringement; and (4) Poly-Vac's remaining claims cannot succeed because the features common to both trays are not eligible for trade dress protection. Poly-Vac opposes these claims and seeks partial summary judgment on its infringement claim.
DISCUSSION
Summary judgment is appropriate in patent and trade dress infringement suits, as in other actions, only when the materials on file show that no genuine issue exists as to any material facts, and the moving party is entitled to judgment as a matter of law. Fed. R. Civ. P. 56(c); Tone Bros., Inc. v. Sysco Corp.,
28 F.3d 1192, 1196 (Fed. Cir. 1994), cert, denied, 115 S. C t . 1356 (1995). A "material fact" is one "that might affect the outcome of the suit under the governing law," and a genuine factual issue exists if "the evidence is such that a reasonable jury could return a verdict for the nonmoving party." Anderson v. Liberty Lobby, Inc., 477 U.S. 242, 248 (1986). The record and all reasonable inferences therefrom are construed in favor of the nonmoving party. Griqqs-Rvan v. Smith, 904 F.2d 112, 115 (1st Cir. 1990).
If the party moving for summary judgment has the burden of proof at trial, the court will grant the motion only if: (1) the moving party initially produces enough supportive evidence to entitle the movant to judgment as a matter of law (i.e., no reasonable jury could find otherwise even when construing the evidence in the light most favorable to the nonmovant), and (2) the nonmovant fails to produce sufficient responsive evidence to raise a genuine dispute as to any material fact. Fitzpatrick v. Atlanta, 2 F.3d 1112, 1115-17 (11th Cir. 1993). In contrast, if the nonmovant bears the burden of proof, the court will grant the motion if: (1) the movant alleges that the nonmovant lacks sufficient proof to support one or more elements of her case, and (2) the nonmovant is unable to produce sufficient responsive evidence to withstand a motion for judgment as a matter of law. Id.; see also, Mesnick v. General Elec. Co., 950 F.2d 816, 822 (1st Cir. 1991), cert, denied, 504 U.S. 985, (1992). Thus, the amount and guality of the responsive evidence that the nonmovant must produce to successfully resist a motion for summary judgment will depend upon whether the nonmovant bears the burden of proof at trial. Fitzpatrick, 2 F.3d at 1115-17.
With these standards in mind, I turn to the merits of the cross motions.
A. Validity of the '676 Patent
PST argues that the '67 6 patent2 is invalid because the device it describes would have been obvious to a person having ordinary skill in the pertinent art.3 A patent will be deemed to
2The '676 patent consists of the following claim: A sterilization tray assembly for sterilizing, transporting, and storing instruments, comprising: a tray, having;
an upper tray section including a plurality of upper tray ports spaced in a predetermined pattern; a lower tray section including a plurality of lower tray ports spaced in a predetermined pattern; locking means for engaging said upper tray section and said lower tray section to form a sealing contact between said tray sections; and a mat made of silicone rubber and sized to fit said tray, said mat being positioned between said tray sections and having an upper surface and a lower surface, said mat including;
a plurality of mat ports in said mat spaced in a predetermined pattern wherein said mat ports and said lower tray ports are in vertical alignment; a plurality of upwardly tapered, vertical projections spaced in a predetermined pattern on said upper surface, said vertical projections having tips at their free ends to provide support for instruments above said upper surface;
a plurality of downwardly projecting support feet depending from said lower surface spaced in a predetermined pattern for spacing said lower surface above said lower tray section.
be obvious if the differences between the subject matter sought to be protected and the prior art are such that the subject matter as a whole would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains.
35 U.S.C.A. § 103. Although the obviousness of an invention is determined as a matter of law, this legal determination must be based on subsidiary factual determinations. Electro Medical Svs., S.A. v. Cooper Life Sciences, 34 F.3d 1048, 1052 (Fed. Cir. 1994). Specifically, the court must determine (1) the "scope and content" of the prior art, (2) "the differences between the prior art and the claims at issue," (3) "the level of ordinary skill in the pertinent art," and (4) the effect, if any, of "[s]uch secondary considerations as commercial success, long felt but unsolved needs [and] failure of others [to invent]." Ryko Mfg. Co. v. Nu-Star, Inc., 950 F.2d 714, 716 (Fed. Cir. 1991) (internal guotation omitted); Heidelberqer Druckmaschinen A.G. v. Hantscho Commercial Prods., 21 F.3d 1068, 1071 (Fed. Cir. 1994). In cases such as this, where the patent at issue combines references in the prior art, "the claimed invention must be considered as a whole, multiple cited prior art references must suggest the desirability of being combined, and the references must be viewed without the benefit of hindsight afforded by the disclosure." In re Paulson, 30 F.3d 1475, 1482 (Fed. Cir. 1994); accord In re GPAC, Inc., 57 F.3d 1573, 1581 (Fed. Cir. 1995) . All facts that are essential to an obviousness claim must be proved by the proponent of the claim by clear and convincing evidence. Ryko, 950 F.2d at 716. Accordingly, in reviewing PST's summary judgment motion, I must determine whether PST has produced sufficient evidence to reguire a finding of obviousness when the evidence is construed in Poly-Vac's favor.
The parties do not dispute that the prior sterilizing trays manufactured by Poly-Vac and a competitor ("Riley") represent pertinent prior art showing all of the limitations in the '676 patent except the use of downwardly projecting support feet to suspend the mat above the lower tray surface. The parties also agree that another patent ("Spence patent") is relevant as prior art teaching the use of support feet in a sterilizing system. The Spence patent discloses a sterilization system using a removable interior basket supported by a base having "a plurality of support feet 109 spaced about the inner periphery of inner wall 82 which support basket 106 clear of the bottom base 60.
This is to prevent basket 60 from trapping condensation within the sterilization system 10 when steam is utilized as the sterilizing media."
The parties' primary areas of disagreement over the obviousness of the '676 patent concern (1) the degree of difference between the support feet specified in the Spence patent and the support feet specified in the '676 patent, and (2) the extent to which the earlier Poly-Vac and Riley trays and the Spence patent suggest the combination of prior art represented by the '67 6 patent. Such guestions must be resolved from the standpoint of a person of ordinary skill in the pertinent art. In re GPAC, Inc., 57 F.3d at 1581. Since PST has failed to offer any evidence that would permit me to determine the appropriate skill level to be used in resolving these disputes, I must deny its summary judgment motion.
B. Enforceability of the '676 Patent
PST next argues that the '67 6 patent is unenforceable due to Poly-Vac's allegedly ineguitable conduct in failing to disclose certain prior art.4 The defense of ineguitable conduct reguires surrendered and the reasons for surrender. Southwall Technologies v. Cardinal IG Co., 54 F.3d 1570, 1599 (Fed. Cir. 1995), petition for cert, filed, (Sept. 19, 1995). "Whether estoppel applies is a question of law." Wang Lab., 993 F.2d at PST concedes for purposes of its estoppel claim that its product meets all of the limitations set forth in the '676 patent except for those that concern the location of the tray's mat support feet. The PST tray holds the mat above the lower tray surface through the use of projections extending upwards from the surface of the lower tray whereas the '67 6 patent claims the right to accomplish the same function through the use of downwardly projecting support feet extending from the mat itself. PST argues that Poly-Vac is estopped from claiming that the two methods are equivalent because it limited its claim to the use of downwardly projecting support feet in order to obtain the patent. I reject this contention because it is based upon an incorrect interpretation of the patent's prosecution history.
The original patent application had six claims. The Patent Office rejected all six claims as obvious and the applicant subsequently cancelled the original claims and substituted a single new claim that resulted in the '676 patent. In distinguishing this new claim from the prior art, the applicant explained that, unlike the prior art, the claim's combination of features, including a means to suspend the mat above the lower tray surface, served to reduce retained condensation that could promote the growth of bacteria. In suggesting this distinction, however, the applicant did not narrow its initial application based on the structure and location of the device's support feet. Since the applicant never surrendered any portion of the original claim that concerned the structure and location of the support feet, Poly-Vac is not estopped from claiming that a similar sterilization tray using support feet projecting upwards from the lower tray surface infringes the '676 patent.
D. Trade Dress Infringement
At the June 20, 1995, hearing, the parties agreed that the remainder of Poly-Vac's claims, violation of the Lanham Act, common law unfair competition, and unfair and deceptive trade practices, depend on whether PST's use of the same colors in its tray constitute trade dress infringement. Trade dress is a product's total image based on its features including its color. Merriam-Webster, Inc. v. Random House, Inc., 35 F.3d 65, 70 (2d Cir. 1994), cert, denied, 115 S. C t . 1252 (1995). To prove trade dress infringement, Poly-Vac must show that its trade dress is distinctive either inherently or because of an acquired secondary meaning and that a likelihood of confusion exists between its trays and PST's trays. Two Pesos, Inc. v. Taco Cabana, Inc., 112
S. C t . 2753, 2758 (1992); Jeffrey Milstein, Inc. v. Greger, Lawlor, Roth, Inc., 58 F.3d 27, 31 (2d Cir. 1995). Color alone may constitute a protectable trade dress if it meets the criteria. See Oualitex Co. v. Jacobson Prods. Co., 115 S. C t . 1300, 1303 (1995) .
PST invokes the affirmative defense of functionality in support of its summary judgment motion. See id.; Inwood Lab., Inc. v. Ives Lab., Inc., 456 U.S. 844, 862-63 (1982) (White, J. concurring); Badger Meter Inc. v. Grinnell Corp., 13 F.3d 1145, 1151 (7th Cir. 1994). A product feature is functional "'if it is essential to the use or purpose of the article or if it affects the cost or quality of the article,' that is, if exclusive use of the feature would put competitors at a significant non- reputation-related disadvantage." Oualitex C o ., 115 S. C t . at 1304 (quoting Inwood Lab., Inc., 465 U.S. at 850, n.10). Color may or may not be functional depending on the product. Oualitex Co., 115 S. Ct. at 1304.
PST argues that the amber color of the tray lid is functional because the pigment is due to a necessary ingredient in the lid "to allow it to function satisfactorily at the autoclave temperatures." Poly-Vac agrees that an ingredient of the tray lids is amber but counters that Poly-Vac is able to tint its lids, which are made with the same ingredient, to other colors. As to the tray bottoms, PST states that the only colors available are blue, grey, black, and white and that PST chose blue, which is the same as Poly-Vac's trays. Poly-Vac states that it uses different colors for tray bases that it produces for private customers so that blue is not essential to making the product. Both parties support their arguments with affidavits of their corporate officers who are presumably knowledgeable about the components of their products. Based on the evidence presented, a genuine dispute of material fact exists as to the functionality of the colors of the trays. Accordingly, summary judgment is denied.
E. Poly-Vac's motion for suramary judgment
Poly-Vac bases its summary judgment motion in part on PST's admission, limited to its own motion for summary judgment, that PST's trays meet all the limitations of the '67 6 patent except for its specification of "downwardly projecting support feet." PST responds by arguing that its admissions were made for a limited purpose and that they cannot be used to support Poly- V a c 's motion.
Cross motions for summary judgment do not necessarily establish undisputed facts. Wiley v. American Greetings Corp., 762 F.2d 139, 140 (1st Cir. 1985). Also, concessions made by one party for the limited purpose of supporting its own motion for summary judgment do not carry over to an opponent's cross motion.
6 James W. Moore, Moore's Federal Practice 5 56.13 at 56-176-77 (2d ed. 1995). Here, PST specifically limited its concession to its own motion for summary judgment, and, therefore, PST's concessions are not available to support Poly-Vac's cross motion.
Poly-Vac bears the burden of proving its infringement claim at trial.[5] Therefore, as the moving party with the burden of proof, Poly-Vac initially must provide enough credible evidence that every limitation set forth in the '676 patent is found in PST's trays so that no reasonable juror could find in PST's favor. Wolverine World Wide, Inc. v. Nike, Inc., 38 F.3d 1192, 1196 (Fed Cir. 1994); Murphy v. Franklin Pierce Law Ctr., 882 F. Supp. 1176, 1180 (D.N.H. 1994). The examples of the parties' trays, offered by Poly-Vac, show that the products are indeed similar but do not establish that PST's trays meet every limitation in the '676 patent claim. For example, Poly-Vac has not demonstrated that the different location of the support feet in the two products is functionally equivalent or that the cover on the PST trays includes a "locking means for engaging said upper tray section and said lower tray section to form a sealing contact between said tray sections" as described in the '676 patent claim. Therefore, Poly-Vac has failed to carry its burden and summary judgment is denied.
____________________________ CONCLUSION
For the foregoing reasons the parties' motions for summary judgment (document nos. 7 and 11) are denied.
SO ORDERED.
Paul Barbadoro United States District Judge October 3, 1995 cc: Bernard Sweeney, Esq.
Martin Gross, Esq.
Norman Soloway, Esq.
Arnold Rosenblatt, Esq.