C.F.R. homeSearch C.F.R.
C.F.R.Title 27Chapter I—Alcohol and Tobacco Tax and Trade Bureau, Department of the TreasurySubchapter A—AlcoholPart 7—Labeling and Advertising of Malt BeveragesSubpart D—Label Standards

27 C.F.R. § 7.51 (2026)

Requirement for firmly affixed labels

Edition and currency
eCFR text as of Sept. 29, 2026. The text is the edition Syfert holds; for a past event, check the version in force on that date.
Other sources
CURRENTeCFR text as of Sept. 29, 2026

(a) General rule. Except as otherwise provided in paragraph (b) of this section, any label that is not an integral part of the container must be affixed to the container in such a way that it cannot be removed without thorough application of water or other solvents.

(b) Exception for keg labels. The following provisions apply to labels on kegs with a capacity of 5.16 gallons or more that bear mandatory information, as defined by § 7.61(a)(5), and are in the form of a keg collar or tap cover, as defined in § 7.1.

(1) Such keg collars or tap covers are considered to be firmly affixed if removal would break or destroy the keg collar or tap cover in such a way that it cannot be reused.

(2) Such keg collars or tap covers are not required to be firmly affixed, provided that the name of the bottler or importer of the malt beverage, as applicable under §§ 7.66-7.68, is permanently or semi-permanently stated on the keg in the form of embossing, engraving, stamping, or through the use of a sticker or ink jet method.

(c) This section in no way affects the requirements of part 16 of this chapter regarding the mandatory health warning statement.

Enactment and amendments

Syfert holds no separate history line for this section. Where this code prints a source or history note, it appears with the text, usually at the end.

Versions

Edition shown: eCFR text as of Sept. 29, 2026. Syfert holds no earlier or later version of this section.

C.F.R. Home  |  Search C.F.R.  |  Search cases for this section  |  syfert.com