Already have an account? Sign in instead.
You stay signed in for 30 days on this browser.
Continue with Google Continue with MicrosoftNo account yet? Create a free one.
We sent a six-digit code.
It expires in ten minutes, works once, and only in this browser. Five wrong tries void it. Send another code.
Your account is live and the Cloudflare checks are off for this browser.
Vertical plane radiation characteristics, f(θ)
(a) The vertical plane radiation characteristics show the relative field being radiated at a given vertical angle, with respect to the horizontal plane. The vertical angle, represented as θ, is 0 degrees in the horizontal plane, and 90 degrees when perpendicular to the horizontal plane. The vertical plane radiation characteristic is referred to as f(θ). The generic formula for f(θ) is:
(b) Listed below are formulas for f(θ) for several common towers.
(1) For a typical tower, which is not top-loaded or sectionalized, the following formula shall be used:
(2) For a top-loaded tower, the following formula shall be used:
See Figure 1 of this section.

(3) For a sectionalized tower, the following formula shall be used:
See Figure 2 of this section.

(c) One of the above f(θ) formulas must be used in computing radiation in the vertical plane, unless the applicant submits a special formula for a particular type of antenna. If a special formula is submitted, it must be accompanied by a complete derivation and sample calculations. Submission of values for f(θ) only in a tabular or graphical format (i.e., without a formula) is not acceptable.
(d) Following are sample calculations. (The number of significant figures shown here should not be interpreted as a limitation on the number of significant figures used in actual calculations.)
(1) For a typical tower, as described in paragraph (b)(1) of this section, assume that G = 120 electrical degrees:
| θ | f(θ) |
|---|---|
| 0 | 1.0000 |
| 30 | 0.7698 |
| 60 | 0.3458 |
(2) For a top-loaded tower, as described in paragraph (b)(2) of this section, assume A = 120 electrical degrees, B = 20 electrical degrees, and G = 140 electrical degrees, (120 + 20):
| θ | f(θ) |
|---|---|
| 0 | 1.0000 |
| 30 | 0.7364 |
| 60 | 0.2960 |
(3) For a sectionalized tower, as described in paragraph (b)(3) of this section, assume A = 120 electrical degrees, B = 20 electrical degrees, C = 220 electrical degrees, D = 15 electrical degrees, G = 140 electrical degrees (120 + 20), H = 235 electrical degrees (220 + 15), and Δ = 115 electrical degrees (235−120):
| θ | f(θ) |
|---|---|
| 0 | 1.0000 |
| 30 | 0.5930 |
| 60 | 0.1423 |
Syfert holds no separate history line for this section. Where this code prints a source or history note, it appears with the text, usually at the end.
Edition shown: eCFR text as of Sept. 29, 2026. Syfert holds no earlier or later version of this section.