Already have an account? Sign in instead.
You stay signed in for 30 days on this browser.
Continue with Google Continue with MicrosoftNo account yet? Create a free one.
We sent a six-digit code.
It expires in ten minutes, works once, and only in this browser. Five wrong tries void it. Send another code.
Your account is live and the Cloudflare checks are off for this browser.
Bulk packagings
(a) Except as provided in paragraphs (c) and (d) of this section, each person who offers for transportation a bulk packaging which contains a hazardous material, shall affix the placards specified for the material in §§ 172.504 and 172.505.
(b) Each bulk packaging that is required to be placarded when it contains a hazardous material, must remain placarded when it is emptied, unless it—
(1) Is sufficiently cleaned of residue and purged of vapors to remove any potential hazard;
(2) Is refilled, with a material requiring different placards or no placards, to such an extent that any residue remaining in the packaging is no longer hazardous;
(3) Contains the residue of a hazardous substance in Class 9 in a quantity less than the reportable quantity, and conforms to § 173.29(b)(1) of this subchapter; or
(4) Is an empty IBC transported in accordance with § 173.29(d).
(c) Exceptions. The following packagings may be placarded on only two opposite sides or, alternatively, may be labeled instead of placarded in accordance with subpart E of this part:
(1) A portable tank having a capacity of less than 3,785 L (1,000 gallons). Additionally, portable tanks containing a combustible liquid may be placarded with a combustible placard that meets the label specifications for size in § 172.407(c). However, a transport vehicle containing portable tanks with a reduced-size combustible placard is still required to conform to the placarding requirements in this subpart, including the size requirements in § 172.519(c);
(2) A DOT 106 or 110 multi-unit tank car tank;
(3) A bulk packaging other than a portable tank, cargo tank, flexible bulk container, or tank car (e.g., a bulk bag or box) with a volumetric capacity of less than 18 cubic meters (640 cubic feet);
(4) For an intermediate bulk container (IBC) labeled in accordance with subpart E of this part, the IBC may display the proper shipping name and UN identification number markings in accordance with § 172.301(a)(1) in place of the UN number on an orange panel, placard, or white square-on-point configuration as prescribed in § 172.336(d). Additionally, IBCs containing a combustible liquid may be placarded with a combustible placard that meets the label specifications for size in § 172.407(c). However, a transport vehicle containing IBCs with a reduced-size combustible placard is still required to conform to the placarding requirements in this subpart, including the size requirements in § 172.519(c); and
(5) A Large Packaging as defined in § 171.8 of this subchapter.
(d) A flexible bulk container may be placarded in two opposing positions.
Syfert holds no separate history line for this section. Where this code prints a source or history note, it appears with the text, usually at the end.
Edition shown: eCFR text as of Sept. 29, 2026. Syfert holds no earlier or later version of this section.