C.F.R. homeSearch C.F.R.
C.F.R.Title 49Chapter II—Federal Railroad Administration, Department of TransportationPart 213—Track Safety StandardsSubpart G—Train Operations at Track Classes 6 and Higher

49 C.F.R. § 213.355 (2026)

Frog guard rails and guard faces; gage

Edition and currency
eCFR text as of Sept. 29, 2026. The text is the edition Syfert holds; for a past event, check the version in force on that date.
Other sources
CURRENTeCFR text as of Sept. 29, 2026

The guard check and guard face gages in frogs shall be within the limits prescribed in the following table—

Class of trackGuard check gageGuard face gage
The distance between the gage line of a frog to the guard line 1 of its guard rail or guarding face, measured across the track at right angles to the gage line,2 may not be less than—The distance between guard lines,1 measured across the track at right angles to the gage line,2 may not be more than—
Class 6, 7, 8 and 9 track4′61⁄2″4′5″
1 A line along that side of the flangeway which is nearer to the center of the track and at the same elevation as the gage line.
2 A line five-eighths of an inch below the top of the center line of the head of the running rail, or corresponding location of the tread portion of the track structure.
[78 FR 16112, Mar. 13, 2013]
Enactment and amendments

Syfert holds no separate history line for this section. Where this code prints a source or history note, it appears with the text, usually at the end.

Versions

Edition shown: eCFR text as of Sept. 29, 2026. Syfert holds no earlier or later version of this section.

C.F.R. Home  |  Search C.F.R.  |  Search cases for this section  |  syfert.com