C.F.R. homeSearch C.F.R.
C.F.R.Title 49Chapter II—Federal Railroad Administration, Department of TransportationPart 213—Track Safety StandardsSubpart C—Track Geometry

49 C.F.R. § 213.65 (2026)

Combined track alinement and surface deviations

Edition and currency
eCFR text as of Sept. 29, 2026. The text is the edition Syfert holds; for a past event, check the version in force on that date.
Other sources
CURRENTeCFR text as of Sept. 29, 2026

On any curved track where operations are conducted at a qualified cant deficiency, Eu, greater than 5 inches, the combination of alinement and surface deviations for the same chord length on the outside rail in the curve, as measured by a TGMS, shall comply with the following formula:

Where— Am = measured alinement deviation from uniformity (outward is positive, inward is negative). AL = allowable alinement limit as per § 213.55(b) (always positive) for the class of track. Sm = measured profile deviation from uniformity (down is positive, up is negative). SL = allowable profile limit as per § 213.63(b) (always positive) for the class of track.[78 FR 16102, Mar. 13, 2013]
Enactment and amendments

Syfert holds no separate history line for this section. Where this code prints a source or history note, it appears with the text, usually at the end.

Versions

Edition shown: eCFR text as of Sept. 29, 2026. Syfert holds no earlier or later version of this section.

C.F.R. Home  |  Search C.F.R.  |  Search cases for this section  |  syfert.com