C.F.R. homeSearch C.F.R.
C.F.R.Title 49Chapter II—Federal Railroad Administration, Department of TransportationPart 218—Railroad Operating PracticesSubpart G—Train Crew Size Safety Requirements

49 C.F.R. § 218.127 (2026)

Specific freight train exceptions to crew size safety requirements

Edition and currency
eCFR text as of Sept. 29, 2026. The text is the edition Syfert holds; for a past event, check the version in force on that date.
Other sources
CURRENTeCFR text as of Sept. 29, 2026

The requirements in this subpart are not applicable to the following freight train operations that are operated with a one-person train crew:

(a) Mine load out, plant dumping, or similar operation exception. A unit freight train:

(1) Being loaded or unloaded in an assembly line manner;

(2) Located on a track that is temporarily made inaccessible from the general railroad system of transportation;

(3) Moving at a maximum authorized speed of 10 miles per hour or less;

(4) Not requiring the one-person train crewmember to operate a hand-operated switch, fill out paperwork, or call signal indications during the loading or unloading process; and

(5) If the operation is overseen by another person, typically in a tower or on the ground, requiring that person to have the capability of communicating with the one-person train crewmember operating the train.

(b) [Reserved]

Enactment and amendments

Syfert holds no separate history line for this section. Where this code prints a source or history note, it appears with the text, usually at the end.

Versions

Edition shown: eCFR text as of Sept. 29, 2026. Syfert holds no earlier or later version of this section.

C.F.R. Home  |  Search C.F.R.  |  Search cases for this section  |  syfert.com