C.F.R. » Title 16 » CHAPTER II—CONSUMER PRODUCT SAFETY COMMISSION › SUBCHAPTER B—CONSUMER PRODUCT SAFETY ACT REGULATIONS › PART 1201—SAFETY STANDARD FOR ARCHITECTURAL GLAZING MATERIALS › Subpart A—The Standard

16 C.F.R. § 1201.5

Certification and labeling requirements

Read at: eCFRecfr.gov CornellLII GovInfogovinfo.gov CasesGoogle Scholar

(a) Manufacturers and private labelers of glazing materials covered by this part 1201 shall comply with the requirements of section 14 CPSA (15 U.S.C. 2063) and regulations issued under section 14.

(b) [Reserved]

(c) Organic-coated glass that has been tested for environmental exposure from one side only must bear a permanent label on the coating stating “GLAZE THIS SIDE IN” and shall bear in the central 50 percent of the surface area the following message in letters at least 1/4 inch (7 millimeters) high: “SEE PERMANENT LABEL FOR IMPORTANT MOUNTING INSTRUCTION.” The latter message shall be attached to either side of the glazing by any means which shall ensure the message will remain in place until installation.

[42 FR 1441, Jan. 6, 1977, as amended at 45 FR 66007, Oct. 6, 1980]
Notes of Decisions
Cited in 1 case, 2000–2000 · leading case: Leipart v. Guardian Indus., Inc., 234 F.3d 1063 (9th Cir. 2000).
Sort: Relevance Newest Treatment
Leipart v. Guardian Indus., Inc., 234 F.3d 1063 (9th Cir. 2000). “A federal standard exists under the CPSA, requiring that a label be affixed to glass shower doors, but the label cannot be fairly described as a safety warning.”
Annotations are extracted automatically from the opinions in the Syfert caselaw corpus and ranked by authority, recency, and treatment. Dots show Syfertize treatment of the citing case itself.