C.F.R. homeSearch C.F.R.
C.F.R.Title 49Chapter II—Federal Railroad Administration, Department of TransportationPart 240—Qualification and Certification of Locomotive EngineersSubpart B—Component Elements of the Certification Process

49 C.F.R. § 240.123 (2026)

Training

Edition and currency
eCFR text as of Sept. 29, 2026. The text is the edition Syfert holds; for a past event, check the version in force on that date.
Other sources
CURRENTeCFR text as of Sept. 29, 2026 cited 2005 1citing case
At a glance

Courts have cited this section in 1 opinion since 2005.

(a) Each railroad shall adopt and comply with a program that meets the requirements of this section. When any person, including, but not limited to, each railroad, railroad officer, supervisor, and employee, violates any requirement of a program that complies with the requirements of this section, that person shall be considered to have violated the requirements of this section.

(b) A railroad shall provide for the continuing education of certified locomotive engineers to ensure that each engineer maintains the necessary knowledge, skill and ability concerning personal safety, operating rules and practices, mechanical condition of equipment, methods of safe train handling (including familiarity with physical characteristics as determined by a qualified Designated Supervisor of Locomotive Engineers), and relevant Federal safety rules.

(c) A railroad that elects to train a previously untrained person to be a locomotive engineer shall provide initial training that, at a minimum, complies with the program requirements of § 243.101 of this chapter and:

(1) Is composed of classroom, skill performance, and familiarization with physical characteristics components;

(2) Includes both knowledge and performance skill testing;

(3) Is conducted under the supervision of a qualified class instructor;

(4) Is subdivided into segments or periods of appropriate duration to effectively cover the following subject matter areas:

(i) Personal safety;

(ii) Railroad operating rules and procedures;

(iii) Mechanical condition of equipment;

(iv) Train handling procedures (including use of locomotive and train brake systems);

(v) Familiarization with physical characteristics including train handling; and

(vi) Compliance with Federal railroad safety laws, regulations, and orders; and

(5) Is conducted so that the performance skill component shall meet the following conditions:

(i) Be under the supervision of a qualified instructor engineer located in the same control compartment whenever possible;

(ii) Place the student engineer at the controls of a locomotive for a significant portion of the time; and

(iii) Permit the student to experience whatever variety of types of trains are normally operated by the railroad.

(d) Pursuant to paragraphs (b) and (c) of this section, a person may acquire familiarity with the physical characteristics of a territory through the following methods if the specific conditions included in the description of each method are met. The methods used by a railroad for familiarizing its engineers with new territory while starting up a new railroad, starting operations over newly acquired rail lines, or reopening of a long unused route, shall be described in the railroad's locomotive engineer qualification program required under this part and submitted according to the procedures described in Appendix B to this part.

(1) If ownership of a railroad is being transferred from one company to another, the engineer(s) of the acquiring company may receive familiarization training from the selling company prior to the acquiring railroad commencing operation; or

(2) Failing to obtain familiarization training from the previous owner, opening a new rail line, or reopening an unused route would require that the engineer(s) obtain familiarization through other methods. Acceptable methods of obtaining familiarization include using hyrail trips or initial lite locomotive trips in compliance with what is specified in the railroad's locomotive engineer qualification program required under this part and submitted according to the procedures described in Appendix B to this part.

(e) A railroad shall designate in its program required by this section the time period in which a locomotive engineer must be absent from a territory or yard, before requalification on physical characteristics is required.

(f) A railroad's program shall include the procedures used to qualify or requalify a person on the physical characteristics.

[56 FR 28254, June 19, 1991, as amended at 64 FR 60992, Nov. 8, 1999; 85 FR 81312, Dec. 15, 2020]
The 1 case that cites 49 C.F.R. § 240.123 most heavily, weighted by court and treatment. RelevanceNewestTreatment
1
GREENCarpenter v. Mineta, 432 F.3d 1029 (9th Cir. 2005).
cites § 240.123 1×cited by 1 case
Where it cites § 240.123
“See 49 C.F.R. §§ 240.123 , 240.125, 240.127, 240.”
Later courts cite it for
“due process requires notice and an opportunity to be heard.” · 3 citing courts

The flag is Syfertize’s treatment of the citing case itself, not of the statute. “Where it cites” is the passage in the opinion; the holding is a summary of the whole case and may concern another point. Annotations are extracted automatically from the opinions in the Syfert caselaw corpus.

By subsection

Courts have not cited this section by subsection, so its cases are not split up here. The Leading cases tab lists the cases that cite it most heavily.

Enactment and amendments

Syfert holds no separate history line for this section. Where this code prints a source or history note, it appears with the text, usually at the end.

Versions

Edition shown: eCFR text as of Sept. 29, 2026. Syfert holds no earlier or later version of this section.

C.F.R. Home  |  Search C.F.R.  |  Search cases for this section  |  syfert.com